Jeio Tech

CW3-P Series Circulated Water Bath (Programmable)

Highly intuitive user interface is insured by equipping the new smart programmable controller.

  • Microprocessor PID control
  • 10 programs available for temperature ramp up and dwell control
  • 10 steps per a program and 99 hours 59 minutes per a step
  • Stored programs are easily linkable
  • Programs can be repeated up to 99 cycles
  • Pre-heating and heating time are settable before program starts
  • Three point temperature calibration
  • Powerful pump pressure and flow rate throughout the whole temperature range
  • Intuitive touch screen LCD display
  • Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless steel bath with front access drain valve.
  • RS-232 interface for external control and data collection.
  • Complete safety protection system with warning alarms( Low fluid level and dry-running, over-temperature, over-current)

Model CW3-05P CW3-10P CW3-20P CW3-30P
Bathroom Volume  (L / cu ft) 5 / 0.2 10 / 0.4 20 / 0.7 30 / 1.1
Operating Temperature Range  2)  (℃ / ℉) Room Temp.+5 ile 150 /  Oda Sıc.  +9 ile 302
Temperature stability 1)  (±℃ / ℉) 0.05 / 0.09 0.08 / 0.14
Pump Max. pressure 5.9 PSI (406.8 millibar)
Max. flow rate 7.4 gallon / minute (28 liter / minute)
Ölçüler Bath Opening / Depth
(W×L, D) (mm / inch)
150×99, 160
/ 5.9×3.9, 6.3
211×154, 180
/ 8.3×6.1, 7.1
290×214, 200
/ 11.4×8.4, 7.9
300×264, 230
/ 11.8×10.4, 9
tooth
(W×L×H) (mm / inch)
220×395×424
/ 8.7×15.6×16.7
281×450×444
/ 11.1×17.7×17.5
360×510×464
/ 14.2×20.1×18.3
370×560×494
/ 14.6×22×19.4
Net weight (kg / lbs) 12.5 / 27.6 15 / 33 17.5 / 38.6 19.5 / 43
Electrical Requirements  (230V, 50/60 Hz) 8.5A 8.5A 8.5A 8.5A
Cat. No. AAH52741K AAH52751K AAH52761K AAH52771K
Electrical Requirements (120V, 60 Hz) 8.6A 8.6A 8.6A 8.6A
Cat. No. AAH52742U AAH52752U AAH52762U AAH52772U

Recommend Me a System

Please Recommend Me a Column