Additional Features & Specifications

• Upright stainless steel collector coil capable of holding 6L of ice before defrosting. Stainless steel collector lid, 3/4" thick, has neoprene gasket.
• Console cabinet with interior space for vacuum pump (sold separately) and two-piece, removable front panel with viewing window.
• Clear acrylic chamber lid, 3/4" thick, with neoprene gasket.
• Brushed stainless steel and glacier white, powder-coated steel exterior with blue accents.
• Full color, 5" capacitive touch screen with Lyo-Works™ OS:
• Real time display of collector temperature, vacuum level, and optional End-Zone™ end point detection system.
• Start–up mode for collector cool-down and vacuum pull-down (automatic or manual).
• Operating mode (standby or run).
• Vacuum set point, alerts, diagnostic tests, user manual, defrost control, and optional drying accessory parameters.
• Data logging stores and displays data in table or chart format, and may be exported via USB or Ethernet.
• Settings include language (English, Spanish, French, German, or Italian), time, time zone, temperature (° C or ° F), and vacuum (mBar, Torr, or Pa).
• Alerts are programmable to send via Ethernet connection to user-entered email addresses.
• Display settings include brightness, touch sounds (on/off), and screen time out in minutes (on/off).
• Maintenance alert settings include vacuum pump oil change, refrigeration cleaning, total operating hours and line voltage offset.
• Level-specific security lock-out prevents changes to programs and other system parameters.
• Hot gas defrost with auto shut off at +60° C (+140° F).
• On/standby switch.
• Moisture sensor that prevents refrigeration or vacuum start-up when moisture is detected in the drain line.
• Vacuum control valve that maintains vacuum level set point.
• Vacuum break valve that bleeds air into the system when power to the freeze dryer or vacuum pump is shut off. If a power outage less than approximately 5 minutes occurs, the freeze dryer will restart and the refrigeration and vacuum system will resume operation once power is restored. If the power failure is more than approximately 5 minutes and the collector warms above safe limits, the freeze dryer will not automatically restart.
• Side-mounted USB port and rear-mounted Ethernet connection.
• Front-mounted, quick-disconnect drain hose fitting and side-mounted lanyard with hose connector. 18", 1/4" ID silicone tubing and clamp included.
• Internal electrical receptacle for vacuum pump connection.
• 3-wire electrical cord with plug.
• 3/4" OD vacuum connection, 36" of 3/4" ID vacuum hose and two clamps.