Labconco Purifier Cell Logic+ Class II, Type B2 Biosafety Cabinets provide personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates.

All Type B2 Biosafety Cabinets rely on external blowers (usually on the roof of a building) to exhaust 100% of the air entering the cabinet. If the building exhaust blower fails or is mistakenly turned OFF, the cabinet will become pressurized, resulting in contaminated air flowing from the work area into the laboratory. Perform a risk assessment regarding the type of work to be performed in the cabinet if there is an unintended loss of exhaust air.
 
Features (All Models)

• Electronically Commutated Motor (ECM)
• Constant Airflow Profile (CAP) airflow monitoring system
• Intrinsically-safe negative pressure design
• Air-Wave Entry System
• Contain-Air Negative Pressure Channel
• Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available
• Interior-mounted, line-of-sight, color LCD with MyLogic OS displays filter life, status messages for alarm conditions and alerts. 8 languages available
• Bright, 90-150 footcandle, glare-free LED lighting located outside the contaminated work area
• Fully-closing, clear 1/4" tempered safety glass sash
• Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots
• Two electrical duplex receptacles. Flush-mounted-stainless steel with dampened hinges. Single outlets on 230V models. One outlet on each side, with ground fault interruption (115V)
• Smart-Start System user-programmable start up & shut down
• Leak-tight stainless steel interior & powder-coated steel exterior
• Removable towel catch located under work surface
• Code-activated electronic security lock
• 22.6" (57 cm) max. sash opening & 27.0" (69 cm) viewing height
• 10° Angled sash with counterbalanced, easy lift mechanism
• ADA-Compliant touchpad control on right side post
• Removable, seamless type 304 stainless steel, dished work surface with lift out knobs
• Noise level <63 dBA
• Heat load 990 BTU/hour (4' models)
• Nominal inflow velocity of 105 fpm (0.5 m/sec)
• Nominal downflow velocity of 55 fpm (0.3 m/sec)
• 10' (3 m) power cord with plug
• Five year warranty

• Supporting base if non-welded stand option is not selected

• 4' and 6' widths
• International electrical configurations
• Non-welded, NSF-Approved, powder-coated steel telescoping base stand with fixed feet
• Accessory Package: 254 nm UV lamp (not included with Scope-Ready models), ADA-compliant service fixture(s) with ball-type valve(s), and NSF-Approved Vacu-Pass™ Cord & Cable Portal
• Cell Logic+ Packages: Scope-Ready™ Package consisting of 7.0" wide x 10.5" high (18 x 27 cm) sash cutout and Pure-Vu™ Seal with powder-coated steel collar. Stand-Still™ Isolation Platform is required and sold separately.
• Temp-Zone™ Package consisting of temperature-controlled work area, 10.5" wide x 12.0" deep (27 x 30 cm) located on the left side of the work surface. Circulator is required (not included). Circulator requirements: minimum flow rate of 0.4-0.5 GPM (1.5-1.9 LPM), typical volume of 6 liters, and temperature of 0-50° C (chiller/heater).

• ETL listed
• NSF compliant
• CE Conformity marking (230V models)
• ISO 5 conditions per ISO 14644-1 and 2
• ADA-Compliant (controls and receptacles)